A. Basic function-tracking location

2.1 Tracking location

Including returning timing, distance return, blind compensation, speed and mileage statistics, regional monitoring system positioning command, the terminal returns contain longitude, latitude, speed, direction, status information and data.

2.2 Timing monitor

Car GPS terminal can be set to a certain time or a time period or at a certain time interval, the position of the vehicle status information is sent to the monitoring center.

2.3 determined from the monitoring

Car GPS terminal to move a set distance from the vehicle terminal vehicle location, status information is sent to the monitoring center.

B. Basic function-alarm

2.4 Emergency alarm

Including the host fault tips, emergency help, illegal door switch, illegal start, the main electric power-down tips, and out of range prompt. Covert installation of the alarm button is pressed, the monitoring center immediately receive the vehicle alarm information, the center can monitor the situation inside, mainly used in the robbery of vehicles, emergency needs of operations.

2.5 Overspeed alarm

When a vehicle exceeds the speed set by the monitoring center, the car terminal will be informed to the monitoring center.

2.6 Cut power line alarm

When the power line has cut,the backup battery will supply the power to devices and they will continue working ,and it will send "cut power alarm" to the tracking system.

2.7 Geo-fence alarm (in/out geo-fence)

System support to set the polygon area, vehicles into the community or out of bounds, the vehicle terminal on the alarm to the monitoring center to send a cross-border information.

C. Basic function-smart function

2.8 heartbeat return

GPS terminal can be set to a timer heartbeat return time, if no other information is sent during this period, send a heartbeat returns to the monitoring center, to maintain the terminal real-time online.

2.9 Intelligent Self-Test

Vehicle terminal can be self-diagnosis, in the event of failure, failure notification will be sent to the center, such as handles, GPS, GSM, and can automatically take the relevant measures. The monitoring center can also query the terminal the current model, version, configuration, run the state, the device features and peripheral models, issued recovery instructions.

2.10 Intelligent remote control

Through the remote control center system vehicle lock, unlock, one-way speech listening, remove abnormal state, vehicle terminal after accepting instructions according to the speed of the vehicle. Smart judging whether the vehicle circuit or oil enforcement and disconnected operation, if low vehicle speed of 20 km/h, will be implemented for vehicle circuit or circuit disconnection operation, and back to the center a power outage/oil confirm information. Once vehicle accept electric/hydraulic disconnect command, the car terminal recovery instructions will memory the status until the center.

2.11 Forced to remote control

The device will stop the vehicles while the owner send commands to device via platform .

2.12 Emergency monitoring

When Monitoring center receives the emergency alarm, you can start monitoring function to monitor the vehicle interior.

2.13 Storage

When the vehicles move into blind GSM area ,the devices will save positioning information,after they move out the blind area ,it will send the locations datas to system at once by GPRS.

2.14 Mileage statistics

Devices will send the mileage data to the system ,this data could be controlled by system if you want to send this data or not .

2.15 Configured remotely

Configure kinds of parameters ,including IP ,Center number ,monitor parameters etc.

2.16 Car battery protection

Device has High and low pressure protection, main electric reverse connect protection, save electricity etc, Can guarantee car battery will not be affected by device or damage

2.17 firmware upgrading

Device supports to upgrade remotely via SMS .

2.18 SMS operation

The user could use SMS to configure and check the status of devices .

2.19 Checking vehicles location by SMS.

Devices could set user cell phone number ,to use these numbers to check locations of vehicles remotely . When vehicles are in unnormal status,the devices will send SMS to inform user through this cell phone number .


A. I/O input

3.1 The door edge detection input

3.2 ACC

3.3 Clockwise & anticlockwise
rotation sensor

3.4 empty and load input (
used for taxi)

B. I/O

3.5 stop oil or stop elec. (choose
one of them )

3.6 alarm buzzer output

C. A/D input

3.7 fuel sensor ;input voltage
range for fuel sensor:0-6V

3.8 4 pin temperature sensor input
,input voltage range:0-5V .

D . Data port

3.9 4 way RS-232 Serial Data port, used for connect interphone ,LCD , GPS
Navigation , LED , voice broadcast etc.

3.10 RS-485 Data port , support connecting
4 cameras .

E. Audio Interface

3.11 Interphone & LCD (input & output) ;

3.12 id="_x0000_t32" coordsize="21600,21600" o:spt="32" o:oned="t" path="m,l21600,21600e"

o:connectortype="straight" strokeweight="1.5pt">

MIC input and speaker output

4 Standard Packing

GPS device

4.2 GPS antenna

4.3 GSM antenna

GPS power cable

5 Optional accessories

5.1 backup battery

5.2 relay

5.3 GPS Navigation

5.4 camera

5.5 Interphone

5.6 LED Advertising screen

5.7 Clockwise & anticlockwise
rotation sensor

5.8 LCD Scheduling screen

5.9 Speaker and MIC

5.10 fuel sensor

5.11 Temperature sensor

5.12 Text broadcast device

5.13 Buzzer

5.14 bus station broadcaster